Sản phẩm này là hàng chính hãng 100%. Sản phẩm từ Samco Tech đầy đủ hộp và phụ kiện. Quý khách vui lòng kiểm tra sản phẩm trước khi nhận.

Module Keyence KL-LC1

Khối đo cảm biến tải trọng
SKU: KL-LC1
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT

Ưu đãi thêm:

Đặt mua sản phẩm tại Samco Tech ngay để nhận được các ưu đãi hấp dẫn nhất chưa từng có

Miễn phí giao hàng cho đơn hàng từ 1.000.000 VNĐ tới mọi tỉnh thành
Miễn phí ship nội thành trong bán kính 5km với đơn hàng từ 250.000 VN.

🔎 Tìm trên Google “Tên sản phẩm + Samco Tech” để mua sản phẩm chính hãng nhanh nhất nhé!

0969 88 71 73

CAM KẾT CỦA SAMCO TECH
1 Cam kết chính hãng
Hoàn tiền 200% nếu phát hiện hàng giả, hàng nhái.
2 Cam kết tư vấn đúng
Chuyên gia tư vấn trực tiếp qua hotline/zalo: 0969 88 71 73
3 Cam kết bảo mật
Tuyệt đối không chia sẻ thông tin khách hàng cho bên thứ 3.

Yên tâm mua sắm, giải toả lo âu

Nhập khẩu chính ngạch, nguồn gốc rõ ràng

Được tư vấn và khuyên dùng từ chuyên gia

Giao hàng nhanh chóng, uy tín đảm bảo

Theo sát liệu trình sử dụng sản phẩm

Chi tiết sản phẩm
Đánh giá (0)

Model	KL-LC1
Measurement type	Load cell
Power voltage	24 VDC ± 10%, Class 2
Operating ambient temperature	0 to +50°C (no freezing)
Operating ambient humidity	35 to 85%RH(no condensation)
Ambient temperature for storage	-20 to +70°C
Operating environment	Minimal amount of dust and corrosive gas present
Measurement category	–
Wire temperature rating	+60°C or more
Noise immunity	1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000-4-2/-3/-4/-6)
Withstand voltage	1,500 VAC for 1 minute (between the power supply terminal and each terminal and between all the terminals and the case)
Insulation resistance	100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and each I/O terminal and between all the terminals and the case)
Internal current consumption (excluding current for driving input circuits)	230mA or less
Shock resistance	Conforms to JIS B 3502 and IEC 61131-2, 147 m/s², operating time: 11 ms, 3 times in each of the 3 directions
Pollution degree	2
Vibration resistance (Intermittent vibration: Frequency: 10 to 57 Hz, Amplitude: 0.075 mm)	Frequency: 57 to 150 Hz, Acceleration: 9.8 m/s²
Vibration resistance (Continuous vibration: Frequency: 10 to 57 Hz, Amplitude: 0.035 mm)	Frequency: 57 to 150 Hz, Acceleration: 4.9 m/s²
Weight	approx 350g
Number of channels	1CH
Number of ranges	4
Range switching	Setting: Use the setting switch.
Sampling rate	1 ms (1,000 times/sec.)
Input range	Range 1: 0.5 mV/V, Range 2: 1.0 mV/V, Range 3: 2.0 mV/V, Range 4: 3.0 mV/V
Resolution (5V, Range 1: 0.5 mV/V)	0.5 µV, 1/10000
Linearity (0 to 50°C)	±0.2% of F.S. ± 1 digit
Zero-drift (0 to 50°C)	±0.4% of F.S. ± 1 digit
Control input	2 (Parameters are used to switch between the KL input, peak/bottom hold control input, and 0-point adjustment input.)
Control output	2 transistor (NPN open-collector) outputs (Parameters are used to switch between the KL output and comparator output.)
Setting data	Recorded to the EEPROM (rewritable 1,000,000 times)
Compatible sensor	350 Ω
External calibration input signal	2 inputs
Maximum input voltage	DC26.4V
Control output (Transistor NPN output)	Rated load: DC30V 0.1A
KL link specifications	Model: KL-N20V, supported PLC: KEYENCE KV-1000/700; model: KL-N10V, supported PLC: KEYENCE KV-10/16/24/40

Lựa chọn PLC phù hợp với Module keyence

SKU	Mô tả
CPU
KV-X500	CPU unit
KV-8000	CPU unit
KV-7500	CPU unit with built-in EtherNet/IP® port
KV-7300	CPU unit with built-in serial port
KV-5500	CPU unit with built-in EtherNet/IP® port
KV-5000	CPU unit with built-in Ethernet port
KV-3000	CPU unit with built-in serial port
KV-1000	CPU unit with built-in serial port
KV-700	CPU unit with built-in serial port
I/O unit
KV-B16RA	16-point Screw Terminal Block, Relay Output
KV-B16RC	16-point Screw Terminal Block, Relay Output
KV-B16TA	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP	16-point Screw Terminal Block, Transistor (Source)
KV-B16TD	16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA	16-point Screw Terminal Block
KV-B16XC	16-point Screw Terminal Block
KV-B8RC	8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD	8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD	16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA	32-point Connector Transistor (Sink)
KV-C32TC	32-point Connector Transistor (Sink)
KV-C32TCP	32-point Connector Transistor (Source)
KV-C32TD	32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA	32-point Connector
KV-C32XC	32-point Connector
KV-C32XTD	32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA	64-point Connector Transistor (Sink)
KV-C64TC	64-point Connector Transistor (Sink)
KV-C64TCP	64-point Connector Transistor (Source)
KV-C64TD	64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA	64-point Connector
KV-C64XB	64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC	64-point Connector
KV-SIR32XT	High speed I/O unit
I/O unit/Remote I/O unit
KV-N16ER	Expansion output unit, output 16 points, relay output, screw terminal block
KV-N16ET	Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETP	Expansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EX	Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ER	Expansion output unit, output 8 points, relay output, screw terminal block
KV-N8ET	Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETP	Expansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EX	Expansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXR	Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXT	Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ET	Expansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETE	Expansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETP	Expansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPE	Expansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EX	Expansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXE	Expansion input unit input 16 points European terminal block
KV-NC16EXT	Expansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ET	Expansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETP	Expansion output unit 32-output Transistor (source) output Connector type
KV-NC32EX	Expansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXT	Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ER	Expansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40	A/D Conversion Unit, 4 Analog Input Channels
KV-AD40G	High-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40V	A/D Conversion Unit, 4 Analog Input Channels
KV-AM40V	A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40	D/A Conversion Unit, 4 Analog Output Channels
KV-DA40V	D/A Conversion Unit, 4 Analog Output Channels
KV-SAD04	High-speed analogue input unit
KV-SDA04	High-speed analogue output unit
KV-TF40	PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40	Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AM	Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DA	D/A conversion unit (2 points)
KV-NC4AD	A/D Conversion Unit 4-point type
KV-NC4TP	Temperature 4-input unit
Remote I/O unit
KL-16BR	16-point Screw Terminal Block, Relay Output
KL-16BT	16-point Screw Terminal Block, Transistor (Sink)
KL-16BX	16-point Screw Terminal Block
KL-16CT	16-point Connector Transistor (Sink)
KL-16CX	16-point Connector
KL-2DA	D/A Conversion Unit, 2 Analog Output Channels
KL-2TF	PID Temperature Adjustment Unit (2-channel)
KL-32CT	32-point Connector Transistor (Sink)
KL-32CX	32-point Connector
KL-4AD	A/D Conversion Unit, 4 Analog Input Channels
KL-8BLR	8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT	8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX	8-point Screw Terminal Block with Repeater Function
KL-8BXR	8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT	8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1	Joint Cable Adapter
KL-DC1A	DC Current Input Unit
KL-DC1V	DC Voltage Input Unit
KL-LC1	Load Cell Measurement Unit
KL-N20V	KL Master Unit
KL-T1	T-shaped Branch Unit
KL-WH1	Power Measurement Unit
KV-EP02	EtherNet/IP® Compatible Communication Unit
KV-RC16BR	16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT	16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX	16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT	16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT	32-point Screw Terminal Block, Transistor Output
KV-RC32BX	32-point Screw Terminal Block Input
KV-RC8BXR	8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT	8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G	2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S	2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S	4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V	2-axis Pulse Train Positioning Motion Unit
KV-MC40V	4-axis Pulse Train Positioning Motion Unit
KV-ML16V	16-axis ML 2-compatible Positioning Motion Unit
KV-MX1	INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PL	High-Speed Positioning Unit
KV-XH04ML	4-Axis Positioning/Motion Unit
KV-XH16ML	16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V	2-channel Multi-function High-speed Counter Unit
KV-SSC02	High speed counter unit
Information/Network unit
KV-CL20	Master/Local Unit
KV-DN20	DeviceNet® Unit
KV-EP21V	EtherNet/IP® Unit
KV-FL20V	FL-net Unit
KV-L20V	Serial Communication Unit
KV-L21V	Serial Communication Unit
KV-LE20V	Ethernet Unit
KV-LE21V	Ethernet Unit
KV-LH20V	Communication Positioning Unit
KV-LM20V	High-speed Multi-link (Megalink) Unit
KV-LM21V	High-speed multi-link Unit
KV-XL202	Serial communication unit, 2 ports (RS-232C×2)
KV-XL402	Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02	EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000C	Bus Connection Unit
KV-EB1	Extension Unit
KV-N1	Conversion unit with connector unit
KV-NC1	Conversion unit with terminal block connector
KV-PU1	AC Power Supply Unit with Error Output